Price list
Use
Joosten weld tape is a high-quality, highly adhesive weld tape with elastic properties that can only be used for PE membrane.
JOOSTEN weld tape is extremely self-adhesive and, when used correctly, forms a permanent connection between the contact surfaces, thereby achieving a good sealing effect.
JOOSTEN weld tape is ideal for repairs and small joints.
Welding with hot air, for example, is recommended for joining larger surfaces.
JOOSTEN weld tape adheres particularly well to clean surfaces of metallic and non-metallic bases.
In principle, make sure that the parts to be joined overlap on both sides.
JOOSTEN weld tape is supplied on rolls. There is a layer of non-adhesive paper between the self-adhesive layers which means the weld tape can easily be unrolled and cut to length.
The free material side of the cut lengths is placed on the surface to be sealed and adheres immediately. The covering paper is then removed and the second side of the sealing tape overlaps with the second surface.
How to use the roll:
Note:
This information is provided according to the current state of chemical and technical developments but no completeness is claimed.
The best guarantee against less than perfect results - for which we are not liable - is to perform your own tests. This is because constantly changing conditions of use, working method and materials must match the conditions prevailing on the work floor.
Joosten weld tape is a high-quality, highly adhesive weld tape with elastic properties that can only be used for PE membrane.
JOOSTEN weld tape is extremely self-adhesive and, when used correctly, forms a permanent connection between the contact surfaces, thereby achieving a good sealing effect.
JOOSTEN weld tape is ideal for repairs and small joints.
Welding with hot air, for example, is recommended for joining larger surfaces.
JOOSTEN weld tape adheres particularly well to clean surfaces of metallic and non-metallic bases.
In principle, make sure that the parts to be joined overlap on both sides.
JOOSTEN weld tape is supplied on rolls. There is a layer of non-adhesive paper between the self-adhesive layers which means the weld tape can easily be unrolled and cut to length.
The free material side of the cut lengths is placed on the surface to be sealed and adheres immediately. The covering paper is then removed and the second side of the sealing tape overlaps with the second surface.
How to use the roll:
 1. remove first layer of covering paper or film from the profile. |
 2. cut the covering paper or film. |
 3. apply the profile, press into place and unroll the desired length or cut off and fix the required length. |
Note:
This information is provided according to the current state of chemical and technical developments but no completeness is claimed.
The best guarantee against less than perfect results - for which we are not liable - is to perform your own tests. This is because constantly changing conditions of use, working method and materials must match the conditions prevailing on the work floor.